parking lot striping in houston tips
Today we are going to discuss very basic & the process of stripping a typical parking. Whit this information you can get some help & idea while striping. This is intended to give you an idea of what you will be doing on a typical job.
When you decide to get Houston Commercial Parking Lot Striping then you would definitely need some help. If you decide to do it yourself then you need some machinery like striping machine, blower etc.
Once you have a possession of a Striping Machine then unload it near grass & it would be nice if you have access to water also near the unloading spot.
Once you have reached the project site & have unloaded your striper & tools then you may follow these steps:
Stripping the Parking Lot:
Now I power up the machine to get started and start striping the parking lot. Always stripe in a logical progression in the parking lot. For example, if you have a nose to nose parking with a center line dividing the two rows of cars you would never stripe the center line first as you would like to avoid it in the first phase. If you did the center line first then you would have to wait 15 minutes for it to dry before you could do any more stripping which can delay your day to complete the job. Instead, It is recommended to start doing the 40-foot lines first and work your way to the end. Then once you complete it you can roll back to the other end of the line and do one line down the center to finish off that section without any disturbance. You may have to wait for a little for the last lines to dry up but if you don’t want to wait you can plan to knock out a few stripes in the next section, then roll back to earlier section one and finish the center line. It is all about planning.
Address: 5510 Old Greenhouse Rd, Houston, TX 77084
Phone: (832) 566-0322